The Final Outcome

Thesis is finally over and it feels so good to be done! I know everyone is eager to see to the final product, but I'm still tweaking the actual fly through of my scene. I do however, have some wonderful stills of various parts of the train station as it currently is in UDK.

 The Train Tracks with McQuinn above and the giant doors of the Gatehouse ahead.

 A close up of McQuinn's Sign.

 An overhead shot of what the train station looks like.

 A lovely look at the Rasheem Lux and Valheim Station.

 Looking out from the tunnel below Valheim Station.

 The Gatehouse from the ground above the train tracks.

And finally a great shot of the Rasheem Lux storefront and appartments.

There are definitely some things I want to adjust/polish, but I am extremely pleased with how much I was able to get done over the last 22 weeks.  There were a lot of bumps along the way, but I really couldn't have hoped for a better result. I'm hoping to have the fly through and modular breakdown videos up soon!

W9: Putting On The Polish

I've been overwhelmingly busy for the past several weeks working on my thesis, texturing, UVing, lighting in UDK, and adding in small details. I have a lot of new things to share, but unfortunately I melted 60% of my left hand off today while working in a glass studio hot shop. It's really only 3 out of the 5 the finger tips, so it's not quite that bad, but they are second degree burns so I won't be doing too much typing. My original plan was lots of pictures accompanied by typed explanations, but because of my current situation I've decided to do an updated fly through video instead.


mRabil W9Thesis from Madeleine Rabil on Vimeo.

I took some screen shots of what things look in the UDK editor:

I've also got some examples of some of my texutres:

Winter Quarter Week 2: Lighting and Cinematics

Rabil Thesis WIP 1 from Madeleine Rabil on Vimeo.

Time Tracking:
0h 30 min: Planning

1h 00 min: UDK Tutorials

2h 09 min: Cinematic Set Up

1h 00 min: Lighting Tutorial

1h 00 min: Planning

2h 00 min: Lighting/Importing in UDK

0h 48 min: Rendering

2h 12 min: Optimizing Light Maps

1h 00 min: Meeting with Thesis Assists

0h 49 min: Adjusting Lights

1h 11 min: Rendering Lights in UDK

1h 00 min: Adjustments in UDK

1h 00 min: Organization
1h 00 min: Fixing Issues
1h 30 min: Fixing z-fighting/exporting and reimporting meshes
0h 30 min: setting up cinematic in AE

Winter Week 1: Normal Baking Chaos

Fall break is over and after a week of relaxing I came back ready to rock this project. Because I managed to get all of my normal mapping done prior to the break, I was actually a week ahead of my previous schedule. As great as a taking another week off sounds, however, I learned a long time ago never to waste an opportunity to get ahead and stay ahead so I decided to spend the week on several things that I had been putting off instead. Due to various time constraints and tasks that were simply more important, I had put off looking into normal baking. While there where a few things I knew I would have to bake normals for, I wanted to see if baking down high poly smoothed meshes to my low poly geometry was something that would help my project aesthetically or not.
During my research I found that this was not something that everyone included in their workflow, so it wasn't entirely clear to me as to whether it was something I would absolutely need to do or not.
My first problem was that it was a process I knew about, but not one I had ever actually done so it meant I would being doing it for the first time. I watched several videos about transfer maps in maya, but because it is one of those processes that doesn't have a perfect answer (meaning the settings will change almost every time), I took me a long time to get it to work right. At first the transfer maps wouldn't even work. Then they would only pick up half the details. It got to the point where I had wasted about half the week trying to get it to work, and I was about ready to just give up, when I suddenly realized my problem. I was following all these tutorials online, but in all of them the user had their grid at the default Maya size. It occurred to me that because my scene is set up to UDK proportions, and therefore 16x larger than the default, and because I was transferring in world space, that i would need to adjust my max search distance to fit the size of the scene. I still didn't entirely understand the transfer map process, but after asking multiple people for help and still not having any solutions, I decided one last try wouldn't hurt. So I set my max search depth to 16% and crossed my fingers while I waited for the normals to bake. I opened the file, and finally found that it was successful.
Now for my second challenge, deciding if baking down the normals would be possible considering how much time I had left to get my project done. I had to consider how much time it took to set up each piece, bake down the normals, clean up any minor issues, and set them all up in my scene. I spent several hours setting up and baking out different pieces of my scene to get an idea how long it would take. Overall I was spending 1-3 hours on each object depending on it's complexity. With 162 objects in total, it was taking far too long. Had it gone like UVs where I was completing about 5 objects per hour it would've been more do-able, but my unfamiliarity with the process was making me slow, too slow.
Although it already seemed like I was not going to be attempting to bake out each object, I wanted to bring one of the objects into UDK and compare it's appearance to objects without their normals baked. I decided, that if it really made a difference aesthetically, than taking the time to do it could still be worthwhile.

The biggest thing baking high poly to low poly was going to do for me was effect the appearance of transitions between edges/surfaces. The objects that I had baked the high poly to the low poly had much softer and sometimes hardly even noticeable edge transitions. While this was not a back thing for smaller objects, I found that it didn't work well with most of the large objects in my scene and I actually preferred the much harder and sharper look of the non-baked objects. In the end I decided, that baking down the normals via transfer maps in maya was not going to be a worthwhile use of my time.
There were however, several smaller objects in my scene where I would need to bake down geometry. Several of the windows in my scene had details that I felt that could be baked down and done mostly through textures.

There were also several small objects that I just never got around to making last quarter that I wanted to make sure got done before I began texturing. The buildings are supposed to be worn down and even boarded up in some cases, so I wanted to several variations of scrap metal/scrap wood coverings to be placed on some of the windows.

Time Tracking:
1h 00m : Timeline and Planning
0h 33m : Background Building thumbs
2h 27m : Normal Baking
1h 55m : Normal Baking Workflow
3h 00m : Normal Baking
2h 00m : Modeling
0h 30m : Planning Organization
1h 36m : Modeling
2h 02m : Modeling/Normal Baking
2h 44m : Modeling
2h 15m : Modeling

21h 02m Total

Fall Week 9: UVs and Exporting

I don't have too many exciting things to show for this week. Most of the work I did involved UVs, which isn't the most exciting thing to look at.  I have also been exporting objects at the same time and slowly building things in UDK. Luckily, I'm very familiar with the UV process and things are actually going better than I was expecting. I have run into an issue with Lighting in UDK however, that I am currently investigating how to fix.

Basically it doesn't want to recognized my UVs for the Lightmaps, so when I bake the lights it looks pretty awful. I've never run into any problems with this before, so I'm not really sure what I am doing differently that is causing them to happen, but hopefully I'll figure it all out soon. There are several ways to fix it, and I'm already going over the options and trying to decided which course of action is the one I want to take. 

Anyways, here're a few of my UV maps that I did this week.

I have UVed 102 objects so far, and have roughly somewhere between 20-50 left. 

And here's a picture of what some of it looks like currently in UDK:

The lights haven't been baked, this is the preview version and so it doesn't look terrible here. 

Other than that, not much else is new. Just a lot of UVing and Exporting, and other than the issue with the light baking, things are going well.

Time Tracking:

4h 15m UV and Exporting

2h 36m UDK Importing and Layout

3h 06m UV and Exporting

7h 00m UV and Exporting

2h 00m UDK Importing and Layout

3h 00m UV and Exporting

1h 15m UDK Importing and Layout

0h 25m Blog Post

23h 37m Total

Fall Week 8- Last Week of Modeling

I got a lot done this week in terms of finishing up all the main models for the scene. Added in all the doors and different trims, and got the ground pieces separated out. Trying to decide how I wanted to do the ground took me more time than I would've liked and kind of felt like I was going around in circles for a lot of it. I'm still a little on the fence about it, but I'm hoping that putting it in UDK this week will help me figure out how to do it.
Once I got everything I absolutely needed modeled, I had a little bit of time left over to add in some small assets. I'm really hoping that I can get a Thesis assist next quarter to make some more for me while I work on the textures because the scene just feels really bare right now. Part of that is due to the fact that there aren't any textures, but I'd really like to get a lot of smaller simpler assets done for the scene to help it feel more finished.

I just did some quick AO passes.  I know some of the details I have now will need to be baked down to normals which hopefully wont be too difficult since I still have copies of models when they were lower res. But that is something that will have to wait until next quarter since I will be focusing on setting up the scene in UDK, UVs, and my presentation for finals week for the rest of fall. Hopefully the import and set up in UDK will go smoothly as I took a little long than I initially wanted on the modeling. I'm also hoping to have everything for my final done early so I can knock out as many UVs as possible before the end of the quarter.

Luckily I am very familiar with the UV process (both new and old methods) so I'm not worried about that, it's just getting them all done as efficiently and as quickly as possible. The nice thing about having modular pieces is that I only have to UV each part once and then get to duplicate it as many times as I need instead of having to do the whole building in one set.

Time Tracking:
2h 00m Modeling
4h 00m Modeling
5h 00m Modeling
7h 00m Modeling
2h 30m Modeling
0h 45m Rendering
0h 25m Blog Post

21h 40m Total

Fall Week 7- Intensive Modeling

Once again I spent the week modeling. I added in a lot more of the details in terms of what I need for the profiles of the various pieces, and overall the scene feels a lot more complete.
I went ahead and took a little bit of time to throw in a quick sun and sky for some nicer renders for this week instead of just using screen shots like I have been. The shadows could be improved, but since my goal is put this in UDK, spending time setting up nice renders in maya, especially this early on, isn't really a good use of my time.

I added trim as well as the details for the side doors and window vents. I'd say I'm about 80-90% done with the base for the train station. There's a lot more pipes I want to work on adding in, but I'm going to be making a small modular set for that. I still need to model the doors.

I added some more architectural detail to the Lux and made some changes to the windows. I'm not sure if all the detail is necessary, but because I still have the old versions of the model it will be easy to scale back a bit if I need to. Aside from the signs and extra decorations I'd like to add, and finishing the doors and store front windows the models for the Lux are pretty much done.

I didn't have too much to change for McQuinn, and other than the doors and any extra decorations it is also done. I played around with making some scrap metal and stuff as covering for closed shops, but I want to wait a little bit before I really delve into making that kind of stuff. Mostly because I need to make sure I plan it carefully enough that I can use it in various places through out the scene. One of the major points of modularity is to reduce the number of unique assets so I want to make sure the boards and other scraps I make can be used effectively.

Of all the buildings, Tepton went through the most changes. I didn't like the feeling I was getting from the design of the side doorways so I changed facade quite a bit. I also modeled the details in the actual gates. If you look below you'll see (aside from the bad shadows I mentioned earlier) that I added in the train tracks as well as a special transitional piece for when the train passes through the actual gate house.

I'm really hoping to push through the last phases of the silhouette pass modeling this week so that I can start putting the level together in UDK and then switch gears to UVing in prepartion for next quarter.

Time Tracking:
0h 30m Gnoman Disk
1h 30m Organization
2h 00m Modeling
6h 00m Modeling
2h 00m Modeling
5h 00m Modeling
2h 00m Modeling
1h 00m Rendering and Set-up
0h 30m Blog

20h 30m Total